Tektronix Phaser 340 - Manual (Page 156)

Troubleshooting 6
User Manual 6-11
600 x 300 dpi prints look
like 300 dpi quality. 600 x 300 dpi mode is for paper only and is not included
in the Phaser 340 standard configuration. Refer to “Print
quality modes” on page 3-8.
Print is wrinkled. You may be using paper that is too thick or thin. Refer to
“All about media” on page 3-15.
Paper edge is rippled. You may be using the wrong grain paper. Load
long-grained paper. Refer to “All about media” on
page 3-15.
Printed image is shifted,
the wrong color, or
margins are not correct. ■ You may have to make adjustments in the application
or print driver. Refer to “Printing and installation
problems” on page 6-13.
■ Make sure that the paper is not curled. Also refer to
“Cleaning for ink smears: paper feed rollers” on
page 4-29.
■ Microsoft PowerPoint users need to leave Background
Printing in the Chooser set to Off.
Colors do not print as
expected. Refer to the Phaser 340 Drivers and Utilities Printing
Reference for details on how to select TekColor color
corrections. You may have attempted to print
transparency loaded in a paper tray but did not specify
transparency as the print media in the printer driver.
Image quality problems (cont'd.)
Symptom Solution