Tektronix Phaser 340 - Manual (Page 51)

Getting Set Up 2
User Manual 2-35
PC: Software for Microsoft Windows 3.1
The following procedure automatically installs the Adobe PS3 printer driver
and PostScript printer description files (PPDs) required by some
applications. The Adobe PS3 driver works faster and more efficiently with
the Adobe PostScript interpreter inside your Phaser 340 than other drivers,
especially if you are using TrueType fonts.
Note If you are using the Tektronix floppy diskettes for installation, you
will need both the Printer Software for Windows diskette and the
Adobe PS3 Printer Driver for Windows 3.1 diskette for this
procedure.
1. Make sure that Windows 3.1 is running on your PC.
2. The driver installation overwrites an older version of the Adobe
PostScript printer driver. If you already have an Adobe driver
installed, you may want to remove your installed Tektronix
printers before continuing, and reinstall them later with the newer
driver. Follow these steps to remove printers with an older driver:
a. From the Control Panel, double-click Printers.
b. In the Printers dialog box, select a printer that was set up with
an older version of the Adobe driver, and click Remove.
c. Repeat Steps a and b for all printers installed with the Adobe
driver.
d. After you have installed the new driver, you can reinstall your
existing printers (PPDs) through the Adobe PostScript
Printers
dialog box in the Control Panel.
3. Quit all applications, including the Control Panel.
4. Insert either the Adobe PS3 Printer Driver for Windows 3.1
diskette or the Phaser 340 CD-ROM into the appropriate drive on
your computer.