Tektronix Phaser 340 User Manual
Page 65
Getting Set Up
2
User Manual
2-49
11.
Highlight one of the following PPD files you installed in Step
and click Select:
■
Use the TK340172.PPD file with the standard version of the printer.
■
Use the TK340692.PPD file with the extended features configuration
of the printer.
Note
If you are not sure whether your printer has the standard
configuration or the extended features option, print the startup
page from the Help Pages menu in the front panel. This page
includes an entry for Extended Features: Yes if installed,
No
if it is not.
12.
Make sure the information under Printer Model matches the
printer you have and the PostScript Version information you got
in Step
13.
Click Select.
Note
If the information under Printer Model is not an exact match,
use the closest printer name, and call Tektronix Customer
Support in the U.S. and Canada at 1-800-835-6100 for the latest
PPD file. Outside the U.S. and Canada, contact your local
Tektronix reseller. You can also download the latest PPD files
from the Tektronix Bulletin Board Service (BBS); see page 6-1.
14.
Click Configure. In the field for Memory Configuration under
Installable Options
, select the amount of memory your printer
has installed. Check other options either Installed or
Not Installed,
as appropriate.
15.
Click
OK
in two dialog boxes and close the Chooser.
When you are done installing drivers, refer to “Installing optional fonts” on
page 2-52.