Tektronix Phaser 340 - Manual (Page 25)

Getting Set Up 2
User Manual 2-9
Installing the optional Lower Paper Tray Assembly
An optional Lower Paper Tray Assembly for paper printing is available as an
option (Tektronix order number 4682FTA). With a 500-sheet capacity, the
Lower Paper Tray Assembly enables the printer to be used as a high-volume
printing solution for networked environments.
Using the optional Lower Paper Tray Assembly, you can configure the
printer for dual-tray printing capability. Two trays are especially useful if
you commonly print on several types of media, for example office paper in
the lower tray and transparencies, letterhead, or label media in the upper
tray.
Warning The printer is not permanently attached to the Lower Paper
Tray Assembly. When moving the printer, first disconnect it
from the Lower Paper Tray Assembly and then move each unit
separately. Moving the printer incorrectly may cause damage
or personal injury.
The printer weighs about 32 kg. (70 lbs.). Do not attempt to
lift the printer without the assistance of another person.
9101-57