Tektronix Phaser 340 User Manual
Page 56
2
Getting Set Up
2-40
Phaser 340 Color Printer
5.
Install the Tektronix Phaser 340 printer driver. From the Printer
menu, select Create Printer; the Create Printer dialog box
appears.
6.
Under Driver, scroll to the end of the list and select Other; the
Install Driver
dialog box appears.
7.
When prompted, do one of the following.
■
If you are using the Phaser 340 CD-ROM:
Type in the CD-ROM drive location. Click
OK
; the Select Driver
dialog box appears.
■
If you are using the Tektronix Printer Software for Windows diskette:
Type in the disk drive location of the diskette. Click
OK
; the
Select Driver
dialog box appears.
■
If you are using an edited copy of the
PRINTER.INF file from Step 2:
Type in the disk drive location of the diskette. Click
OK
; the
Select Driver
dialog box appears.
8.
Under Printer Driver, choose your Phaser 340 printer from the list,
then click
OK
.
■
Select Tektronix Phaser 340 if you have the standard configuration
of the printer.
■
Select Tektronix Phaser 340 with 600 dpi if you have the printer’s
extended features option.
Note
If you are not sure whether your printer has the standard
configuration or the extended features option, print the startup
page from the Help Pages menu in the front panel. This page
includes an entry for Extended Features: Yes if installed,
No
if it is not.