Tektronix Phaser 340 User Manual
Page 57
Getting Set Up
2
User Manual
2-41
9.
In the Windows NT Setup dialog box, type in the same path you
used in Step
(for example, B:). Click Continue; the Noncritical
Error
dialog box appears.
10.
When you are prompted for the location of the PSCRPTUI.DLL file
and the PSCRIPT.DLL file, click Ignore. (These files were installed
in Step
or were already installed.)
11.
When the Create Printer dialog box appears, fill in the other fields
as desired, then click
OK
; the PostScript Printer Setup dialog box
appears.
12.
Select options in the PostScript Printer Setup dialog box.
Enabling the Use Printer Halftoning option is recommended.
Then click
OK
; the Windows NT Setup dialog box appears.
13.
If you installed a PostScript printer in Step
, follow this procedure
to delete it. (Now that the Tektronix printer is installed, this
printer is no longer needed.)
a.
Select the printer you want to remove.
b.
From the Printer menu, select Remove Printer.
c.
At the prompt, click
OK
to remove the selected printer.
When you are done updating the Windows NT driver, refer to “Installing
optional fonts” on page 2-52.