Tektronix Phaser 340 - Manual (Page 62)

2 Getting Set Up
2-46 Phaser 340 Color Printer
LaserWriter 8.x setup
The LaserWriter 8.x driver uses printer-specific PPDs (PostScript Printer
Description files) for information on a printer’s page sizes, printing options,
and media type options. To use the LaserWriter 8.x driver with a Phaser 340
printer, do the following steps depending on the version of the driver you
are using. If the printer is busy, it may take some time to complete this
configuration procedure; you may want to do this procedure when the
printer is idle. You only have to configure a printer once.
Note During installation, the LaserWriter 8.x driver leaves other
versions of the LaserWriter driver intact.
Setting up the LaserWriter 8.3 driver
1. Make sure that the LaserWriter 8.3 driver is installed on your
Macintosh.
If the LaserWriter 8.3 driver is not installed:
The LaserWriter 8.3 driver software is available from Apple
Computer; see your local Apple dealer for details. Refer to the
LaserWriter driver’s documentation, LaserWriter 8.x Update Guide,
for instructions on installing the driver.
2. Follow the instructions in “Installing the printer’s software” on
page 2-30 to install the PPD printer description files. Select one of
the standard options to automatically install all of the printer’s
software, or select the PPD files for drivers and applications
option.
3. Open the Chooser.
4. Select the LaserWriter 8 driver icon.
5. Select your printer from the list.
6. Still in the Chooser, click the Setup button to see a list of options.