Tektronix Phaser 340 - Manual (Page 44)

2 Getting Set Up
2-28 Phaser 340 Color Printer
Selecting a language for the front panel
Messages that appear in the front panel window are in English by default.
To change the language to Spanish, French, German, Italian, or Japanese,
follow these steps.
1. When the printer is on and the Ready message appears, press the
Menu button. The printer displays the first selection in the menu:
Help Pages
<---- ----> Menu
2. Using the left (<----) or right (---->) arrow buttons, scroll
through the selections until the following message appears:
Language
<---- ----> Menu
3. Press the Menu button to access language selections. The printer
displays the following message:
Language:English*
<---- ----> OK
where the asterisk (*) indicates the currently selected language.
4. Using the left or right arrow buttons, scroll through the language
selections until you reach the appropriate setting.
5. Press the OK button to confirm your language selection.
6. Return to the top level of the menu by pressing the button
until the printer displays the Ready message.
Exit Exit