Tektronix Phaser 340 - Manual (Page 39)

Getting Set Up 2
User Manual 2-23
PhaserShare network and serial connections
Optional PhaserShare cards provide Ethernet, Token Ring, or
LocalTalk/serial connections for the printer. PhaserShare cards can be
purchased initially with the printer as an installed option or later as a
separate upgrade kit. If purchased initially, you will find the PhaserShare
network manuals included in the shipping box with your printer. If you
purchased a PhaserShare card as an upgrade kit, install the card using the
directions provided with the upgrade kit.
PhaserShare network interfaces offer high performance and flexible
workgroup connectivity. All data input ports and network protocols are
simultaneously active. Print jobs are processed on a first-come, first-served
basis.
The PhaserShare Network Cards and Software System Administrator Manual
contains all the information necessary for configuring and using the optional
connections. For ordering information, refer to Appendix B. Refer to
“Interface cables and adapters” on page 5-3 in this manual for information
on ordering serial cables.
SCSI connections
The SCSI port is used for connecting these optional peripheral devices:
■ Phaser Copystation
To set up the Phaser Copystation and to connect it to your printer,
refer to Chapter 2 of the Phaser Copystation User Manual. Refer to
“Phaser Copystation” on page B-7 for ordering information.
■ External font disk
Refer to “Adding a hard disk for font storage” on page B-8 for
more information.
Refer to “Interface cables and adapters” on page 5-3 for information on
ordering SCSI cables.