Tektronix Phaser 340 - Manual (Page 78)

3 Printing
3-10 Phaser 340 Color Printer
Color correction
The printer provides TekColor Dynamic Correction, which consists of the
following color correction modes:
Vivid Color, the default color correction mode, is generally recommended
for typical office printing.
Note The print driver help window provides a short description of each
color correction mode. To access information, click on the Help
button (for a Macintosh, in the TekColor Options dialog box;
for Windows, in the Tektronix Printer Features dialog box).
You can view an example output of each color correction mode at the bottom
of the printer’s startup page. Refer to “Printing the startup page” on
page A-5 for instructions.
Note If your printer is networked and you have changed the front panel
settings, make sure that you tell other users on the network.
Printer settings affect all prints made with non-Tektronix
drivers.
Color correction mode Description
None No correction made to colors.
Vivid Color Default setting. Produces the brightest possible colors.
Display Adjusts color to closely approximate the colors on a
standard display screen.
SWOP Press Specification for Web Offset Publications. Typically used
to match U.S. press standards.
Euroscale Press Matches the PANTONE
®
Process Color System Guide,
Euroscale Edition. Typically used to match European
press standards.
Commercial Press Used to match commercial 3M Matchprint
®
proofs.
Monochrome Prints a color image as a monochrome gray scale.
Outputs color page masters in black-and-white for
photocopying.
Use Printer Setting Uses the color correction mode specified in the printer
front panel setting rather than any printer driver setting.