beautypg.com

Tektronix Phaser 340 User Manual

Page 106

background image

4

Caring for Your Printer

4-8

Phaser 340 Color Printer

2.

When you open the front cover, the following message appears:

Caution Hot Surfaces

Replace Maintenance Tray

3.

Grasp the maintenance tray by the front edge and lift up while
sliding it out of the printer.

Note

Once the maintenance tray has been partially used, it leaks drum
fluid if tipped. Never ship a partially used maintenance tray.
Contact with the drum fluid poses no known health risk. Refer to
“MSDS for silicone oil” on page D-7 for mor
e information.

4.

Install a new maintenance tray in the printer.

Note

Be sure to push on both sides of the maintenance tray to latch it
firmly into the printer.

5.

Close the front cover and wait for the printer to warm-up.

6.

To prevent leaking, seal the used maintenance tray in the plastic
bag from the new (replacement) maintenance tray. Treat the used
maintenance tray as normal office waste.

9101-53