Tektronix Phaser 340 - Manual (Page 125)

4 Caring for Your Printer
4-26 Phaser 340 Color Printer
3. There are two sets of lower paper feed rollers. One set of rollers is
rubber; the other set is white plastic. The rubber lower rollers are
located below the maintenance tray; the white plastic rollers are
located on the inside of the front cover.
a. To clean the lower rubber feed rollers, place and hold an
alcohol-soaked swab on top of each roller while turning the
lower feed roller shaft.
b. To clean the lower white plastic rollers, place and hold an
alcohol-soaked swab on top of each roller while turning the
individual roller with your thumb and forefinger.
4. Close the front cover. If the problem persists, refer to “Cleaning
for ink smears: paper exit path” on page 4-34.
9101-32
3
3