Tektronix Phaser 340 - Manual (Page 176)

Technical Notes A
User Manual A-5
Enabling and disabling the startup page
You can enable and disable printing of the startup page in several ways:
■ On a PC, send a PostScript language utility file to the printer. For
more information, refer to the Phaser 340 Drivers and Utilities
Printing Reference.
■ On a Macintosh, use the LaserWriter utility.
■ Use your World Wide Web browser. Refer to the PhaserShare Status
Software User Manual for more information.
■ Through the printer’s front panel, according to the following
instructions:
1. While the Ready message is displayed, press the Menu button.
The printer displays the first item in the setup menu:
Help Pages
<---- ----> Menu
2. Using the left arrow (<----) or right arrow (---->) buttons,
scroll through the selections until the following message appears:
Printer Defaults
<---- ----> Menu
3. Press the Menu button to access the printer defaults settings.
4. Using the left arrow (<----) or right arrow (---->) buttons,
scroll through the selections until the following message appears:
Startup Page
<---- ----> Menu
5. Press the Menu button to access the startup page settings.
6. Press the right arrow (---->) button once for the following
message:
Startup Page:Disabled
<---- ----> OK
7. Press the OK button to disable printing of the startup page.
8. To return to the top level of the menu, press the button until
the printer displays the Ready message.
Exit Exit