Tektronix Phaser 340 User Manual
Page 84
3
Printing
3-16
Phaser 340 Color Printer
Selecting the default media tray using the front panel (optional)
1.
When the printer is on and the
Ready
message appears, press the
Menu
button. The printer displays the first selection in the menu:
Help Pages
<---- ----> Menu
2.
Using the left
(<----)
or right
(---->)
arrow buttons, scroll
through the selections until the following message appears:
Printer Defaults
<---- ----> Menu
3.
Press the
Menu
button to access printer default selections. Using
the left or right arrow buttons, scroll through the selections until
the following message is displayed:
Default Tray
<---- ----> Menu
Note
The
Default Tray
selection only appears if the optional Lower
Paper Tray Assembly is connected to the printer.
4.
Press the
Menu
button to access default tray selections. The
printer displays the following message:
Default Tray:AutoSelect*
<---- ----> OK
5.
Using the left or right arrow buttons, scroll through the default
tray selections until you reach the appropriate setting. An asterisk
next to the selection indicates the active setting.
6.
Press the
OK
button to confirm your default tray selection.
7.
Return to the top level of the menu by pressing the
button
until the printer displays the
Ready
message.
Exit
Exit