Tektronix Phaser 340 - Manual (Page 81)

Printing 3
User Manual 3-13
All about media
The printer prints on Letter- and A4-size office paper, Tektronix-supplied
transparencies, and full sheet, peel-off label stock (such as Avery 5160).
Tektronix transparency media is designed to provide optimal image quality
and reliable operation. Tektronix offers two grades of transparency media:
premium and standard. Tektronix premium transparency media offers
enhanced ink adhesion and print quality for overhead transparencies.
Note Tektronix inks and transparencies are formulated for use with this
printer to ensure the best print quality and long-term reliability.
Tektronix does not guarantee printer performance on
non-Tektronix transparency media.
Tektronix office paper is cut with the correct grain so your prints will not
wrinkle. For information on ordering Tektronix’ paper and transparency
media, refer to the supplies information sheet included with your printer.
Caution To avoid damaging your printer, do not use perforated paper,
three-holed paper, legal-size paper or envelopes.
Do not use transparency media intended for ink-jet or
thermal-wax printers.
Never attempt duplex (two-sided) printing on any type of
media. Ink from the back side of the paper will offset onto the
internal paper path, requiring you to perform cleaning
procedures.
You can recycle the paper printed on a this printer the same way you would
recycle paper from any laser printer.