Toshiba Strata DK 16 User Manual

Page 96

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993

2-72

NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data does not assign a Fixed Call Forward location to any port.
3. To enter a range of ports, key in the following sequence:

4. Press Button/LED 01 to enter blanks.
5. See Program 39, Code 86, to assign Fixed Call Forward buttons on DKTs/EKTs.
6. Fixed Call Forward will forward all calls to the designated port.
7. Stations that have Fixed Call Forward set will not ring.
8. Program 92-9 does not clear Fixed Call Forward memory.

PROGRAM 36

FIXED CALL FORWARD

FORWARD TEL = Port Number (00~19)
Enter the port number of
the station or VM port that
will be call forwarded to
when the Fixed Call Forward
button is pressed.

SELECT = Logical Port Number (00~19)
Enter the port number of the
station that needs a Fixed
Call Forward location
assigned. See Note 3 for
a range of ports.

Logical

Port

Forward

Tel

NOTE: Shaded areas apply to DK16 only

Low port

High port