Toshiba Strata DK 16 - Manual (Page 114)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-90
PROGRAM 78
CO LINE SPECIAL RINGING ASSIGNMENTS
DISA/IMDU/NIGHT RINGING OVER EXTERNAL PAGE
7 8 P S H H Z Z
Specify CO lines by setting
button/LEDs as defined by the
table below. All LEDs with an
"X" should be lit when finished.
CO Line SELECT = Feature Number
S
CO Lines
(Button/LEDs)
01
(01)
02
(02)
03
(03)
04
(04)
05
(05)
07
(07)
08
(08)
06
(06)
1
2
5
Feature
Number
Feature Description
Ring Over External Page during NIGHT mode
DISA CO Line during DAY Mode
DISA CO Line during DAY2 Mode
DISA CO Line during NIGHT Mode
3
1
2
3
1
2
3
Code
Enter Feature Number
1, 2 or 5.
Enter Code
Number 1~3.
Code
Ring IMDU Maint. Modem during DAY Mode
Ring IMDU Maint. Modem during DAY2 Mode
Ring IMDU Maint. Modem during NIGHT Mode
3
3
3
4
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data leaves all LEDs off.
3. See Programs 10-1, 15, 60, 40, 41, 48, and 03 (code 92) for complete DISA programming (for DISA, the
K4RCU PCB must be installed in the Base Unit).
4. See Program 77-1 for night ringing configuration.
5. DISA lines are assigned to DK8 Port 10 and DK16 Port 20 in Program 30 (Account Codes) and Program
41 (outgoing CO line restriction) and Program 48.