Toshiba Strata DK 16 - Manual (Page 91)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-67
NOTES:
1.
For more information, see the instructions preceding the record sheets.
2. Initialized data reads LED 10 ON for all ports.
3. A range of ports may be specified by entering:
4. If Button/LED 15 is lit, Button/LED 17 must be lit.
If Button/LED 19 is lit, Button/LED 17 must be lit.
If Button/LED 20 is lit, Button/LEDs 17 and 19 must both be lit.
5. Voice Mail (VM) to VM call block should be ON for all VM (QSTU, KSTU/PSTU/PESU) ports if the VM/Auto Attendant
machine does supervised and/or screened transfer.
6. Block Exec./Priv. override (LED 18 ON) prevents Privacy Override to the selected station unless the
Privacy Release button is ON at that station; this option (LED 18 ON) prevents Executive Override to the station under
all conditions.
7. Button/LED 10 enables (disables) a telephone to receive an All Call page. All telephones can initiate an All Call page.
PROGRAM 31
STATION CLASS OF SERVICE
3 1 P S H H Z Z
Button/LEDs
Feature LED
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Logical Port Numbers
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
SELECT = Logical Port Number(s)
S
Enter the Logical Port number(s) to which class
of service must be assigned.
See Note 3 for entering a range of ports.
VP (B + Station No.)
VP (B + No Station)
Block Exec./Priv. Ovr.
End/End Signal Rcv (VM)
Receive VM ID Code
VP Integration (A/D)
Group Page 4 - EKTs/DKTs
Group Page 3 - EKTs/DKTs
Group Page 2 - EKTs/DKTs
Group Page 1 - EKTs/DKTs
VM (No Conference)
VM Group 4
VM Group 3
VM Group 2
VM Group 1
VM to VM Call Blocking
OCA Enabled (Receive)
Handsfree No Warning
Handsfree Disabled
5
AC Page - EKTs/DKTs
6
7
NOTE: Shaded areas apply to DK16 only
Light LEDs for the port
specified in the last step. All
buttons/LEDs marked with an
“X” in the table below should
be lit.
Low port High port