Toshiba Strata DK 16 User Manual

Page 92

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993

2-68

NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns Ringing Code 1 and Automatic Off-hook Code 00 for all ports.
3. To enter a range of ports dial the following button sequence:

4. Automatic Preference applies to going off-hook (lifting the handset) and pressing the

Spkr

button.

5. This program applies to digital and electronic telephones only; standard telephones always select the system intercom path

when going off-hook (lifting the handset).

PROGRAM 32

AUTOMATIC PREFERENCE

Enter 0 to disable Ringing Line Preference.
Enter 1 to enable Ringing Line Preference.

DATA = Ringing Code

SELECT = Logical Port Number

Enter the Logical Port number of the
station having preference defined.
See Note 3 below for entering
a range of ports.

Enter 00 for no selection.
Enter 01 for intercom.
Enter 02 for lowest CO line.
Enter 11 ~ 18 for Line Groups 1~ 8.

Automatic Preference Code:

00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19

Logical

Port

Number

Ringing

Code

(0 or 1)

Automatic

Preference

Code

NOTE: Shaded areas apply to DK16 only

Low port

High port