Toshiba Strata DK 16 - Manual (Page 67)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-43
Step 1
Enter Program Mode
Step 2
Enter Program Number
Spkr Hold
Step 5
Exit Program Mode
Spkr Hold Spkr
Step 4
Exit Current Program
Spkr Hold Hold
Step 3
Enter Program Data
H Z Z P S H S and/or
(LED buttons)
more data
See Notes
another program
2 1 3
FIGURE 2-2
PROGRAMMING BUTTON SEQUENCE OVERVIEW
The System Record contains programming forms for Programs 00 ~ 97. A System Record should be
filled out for each system installed as detailed in Chapters 1 and 2.
Each System Record Sheet is supplemented with a guide at the top of it for entering data from it. The
guide illustrates the button sequence a programmer must press, with the exception of sequences common
to all programs, e.g., entering programming mode (P), exiting current program (Z), and exiting programming
mode (Z). To save space, these common sequences are coded, as illustrated above. The
Spkr and Hold
buttons are also coded “S” and “H,” respectively, to save space.
NOTES:
1. Programs 90, 92, and 03 are out of order and placed in front purposely because they must always be completed first and
in this order. Upon completing these steps, begin with Program 00.
2. Do not Press Intercom when entering Step 1.