Toshiba Strata DK 16 - Manual (Page 107)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-83
PROGRAM 44A
EMERGENCY BYPASS OF FORCED/VERIFIED ACCOUNT CODES
4 4 P S H H Z Z
DATA = SELECT =
S
3 or 4 digit emergency
telephone number
To enter blanks,
Press: Button/LED 01
Emergency Number 1: 1
2
3
Emergency Number 2:
Emergency Number 3:
SELECT = DATA = 3 or 4-digit telephone number
51, 52, or 53
to set emergency
number 1, 2 or 3
5
5
5
Example
911 = Initialized Data (Note 2) 9 1 1
NOTES:
1. The emergency telephone numbers assigned in this program will be sent out the CO line immediately when
dialed; they will bypass the Forced/Verified Account Code dialing restriction.
2. If CO lines are behind PBX or CENTREX, program the PBX/CENTREX outside trunk access code: Example:
"9". A pause is automatically inserted following the first 9. See Programs 42-0 and 42-1 to assign the CO lines
and access codes for behind PBX/CENTREX operation. Also, if the system CO lines are behind CENTREX/
PBX, the CENTREX/PBX trunk access codes must be programmed in front of the emergency telephone
number. Example: If the CENTREX/PBX access code is “9”, then enter 9911 in Program 44-51.
3. If Verified Account Codes assigned in Program 69 conflict (are the same) with emergency telephone numbers
assigned in Program 44A, Program 44A has priority.
4. This feature is for use with Forced (Verified or Nonverified) Account Codes, but not with ABR and DISA. It also
does not override Toll Restriction; emergency numbers must be allowed using system Toll Restriction tables
per normal Toll Restriction programming procedures.
5. Program 44B is related to Toll Restriction and is placed with the other Toll Restriction programs in this chapter.