Toshiba Strata DK 16 - Manual (Page 86)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-62
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data does not assign “Hunt-To” points to any port.
3. A range of ports may be assigned by pressing the following button sequence:
4. Press Button/LED 01 to delete a digit from “Hunt-To” port.
5. Program 22 applies to PDIU-DI(2) and PDIU-DS data stations. If programming a PDIU-
DI(2) station, use the associated digital telephone Logical Port number; the PDIU-DS
is programmed using its own unique Logical Port number.
PROGRAM 22
DATA INTERFACE UNIT (DIU) STATION HUNTING (DATA CALLS ONLY)
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Logical
Port
16 17 18 19
2 2 P S H H Z Z S
HUNT TO =
Enter the Hunt To
DIU Logical Port
number. See Note 4. SELECT = Logical Port Number
Enter the DIU port number
of the “Hunt-From”
station. See Note 3 for
entering a range of ports.
Hunt To
NOTE: Shaded areas apply to DK16 only
Low port High port