Toshiba Strata DK 16 - Manual (Page 132)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-108
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns no office codes to tables.
3. Only one area code may be
entered per exception table.
4. To enter a range of office codes, key in:
5. Several ranges or individual office
codes may be entered by separating
them with a
# button.
6. Copy as required,
maximum eight exception tables.
PROGRAM 47
TOLL RESTRICTION EXCEPTION OFFICE CODES ASSIGNED BY AREA CODES
(TABLES 1 AND 2)
P S H S
Record of Exception Office Codes (Data)
Record of Exception Office Codes (Data)
H S H Z Z
AREA CODE =
Enter the area code.
See Note 3.
Enter the number of the
exception table, 1 ~ 8. A new
exception table is needed for
each area code with office
codes that are exceptions
to restriction.
SELECT = Exception Table 1 ~ 8
SELECT = Exception Table 1 ~ 8
Enter the number of the
exception table, 1 ~ 8 again.
DATA =
Enter or display office code(s).
See Notes 4 and 5.
2, 3 or 4
4 7 1
Exception Table (1 ~ 8)
Area Code
Enter 2 to add to the exception table.
Enter 3 to delete from the exception table.
Enter 4# to display the exception
table's office codes.
Exception Table (1 ~ 8)
Area Code
Denotes end of string
Low Office Code
High Office Code