Toshiba Strata DK 16 - Manual (Page 93)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-69
PROGRAM 33
STATION HUNTING (VOICE CALLS ONLY)
3 3 P S H H Z Z S
HUNT TO = Logical Port Number (00~19)
Enter the “Hunt-To”
Logical Port number.
See Note 4. SELECT = Logical Port Number (00~19)
Enter the Logical Port number
of the “Hunt-From” station.
See Note 3 for entering
a range of ports.
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Logical
Port
16 17 18 19
Hunt To
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data does not assign “Hunt-To” points to any port.
3. A range of ports may be assigned by pressing the following button sequence:
4. Press Button/LED 01 to delete a digit from a ”Hunt-To” port.
5. If a hunt station is in the Call Forward mode, calls will be directed to the
forwarded destination.
6. CO lines will hunt if they are programmed to ring at the Hunt station only;
CO lines that ring at more than one station in any given ring program (81 ~ 89).
Low port High port