Roland XV-88 - Manual (Page 227)

227
Quick Reference of Procedures
Appendices
Controlling External MIDI Devices
Deleting a File from
Memory Card 1. Press [UTILITY].
2. Select “1. CARD” on the UTIL 2 page.
3. Select “3. DELETE.”
4. Select the file that you wish to delete.
5. Press [ENTER].
Checking the Free Area
of a Memory Card, etc. 1. Press [UTILITY].
2. Select “1. CARD” on the UTIL 2 page.
3. Select “5. INFO.”
Setting the MIDI
Transmit Channel for
Performance Mode
(for each Zone) Channel parameter (ZONE/MIDI/MIDI)
Turning the MIDI
Transmit Switch On/Off
for Performance Mode
(for each Zone) Tx parameter (ZONE/MIDI/MIDI)
Setting the MIDI
Transmit Channel for
Patch/Rhythm Set Mode Tx Ch parameter (SYSTEM/MIDI/PATCH MIDI)
Turning On/Off the
Transmit Switch of
Program Change
Message Program parameter (SYSTEM/MIDI/TRANSMIT MIDI)
Turning On/Off the
Transmit Switch of Bank
Select Messages Bank Sel parameter (SYSTEM/MIDI/TRANSMIT MIDI)
Switching Multiple Tones
on External MIDI Devices
at Once When Switching
the Performance 1. Set the Tx parameter (ZONE/MIDI/MIDI) of the Zone to
be used to ON.
2. Set the Bank Select MSB/LSB parameter (ZONE/EXT
CONTROL/EXT PC) to match the Bank Select of the
external MIDI device.
3. Set the P.C# parameter (ZONE/EXT CONTROL/EXT
P.C) to match the Program Change number for the Tone
you want the external MIDI device to select.
4. Save the Performance.
5. Switch to the saved Performance from other
Performances.