Roland XV-88 - Manual (Page 222)

222
Quick Reference of Procedures
Rhythm Set Mode
Modifying Patch Settings
(basic procedure) 1. Turn on the [EDIT] indicator.
2. Use the function buttons to select the display group.
3. Use / to select the desired setting page.
4. Turn off the [EDIT] indicator.
5. Use TONE SELECT [1]–[4] (function buttons) to select the
Tone.
6. Use / to select a Parameter.
7. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to modify the value.
* If you wish to move to a different display group, turn on the
[EDIT] indicator.
Changing the Patch
Assigned to a
Performance Part 1. Press [PERFORM] + [PATCH].
2. Use / to select a Part.
3. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to choose the Patch.
The rest procedure is the same as for the basic procedure listed
above.
Simultaneously
Modifying the Values of
Two or More Tones In a Tone setting display, hold down the TONE SELECT [1]–
[4] (function button) for one Tone, and press the button(s) for
the other Tone(s) you want to edit.
Adjusting the Volume of
a Patch Level parameter (PATCH/COMMON/PATCH LVL&PAN)
Adjusting the Pan of a
Patch Pan parameter (PATCH/COMMON/PATCH LVL&PAN)
Selecting the Rhythm Set
Mode PLAY Page Press [RHYTHM].
Selecting a Rhythm Set Use the VALUE dial, [INC/+], [DEC/-], or the numeric keys
to choose a Rhythm Set.
Selecting a Rhythm Set
Group USER: Press [USER].
CD-A–H: Press [CARD] → [A]–[H].
PR-A–F, H: Press [PRESET] → [A]–[F], [H].
XP-A–D: Press [EXP] → [A]–[D].
Selecting Rhythm Sets
Using the Digit Hold
Function 1. Press [SHIFT] + numeric key [0] (turn on the Digit Hold
function).
2. Use the numeric keys to specify the number of the one’s
place.
* To turn off the Digit Hold function, press [SHIFT] + [0] once
again.