Roland XV-88 - Manual (Page 221)

221
Quick Reference of Procedures
Appendices
Patch Mode
Modifying Zone Settings
(basic procedure) 1. Turn on the [ZONE] indicator.
2. Use the function buttons to select the display group.
3. Use / to select the desired setting page.
4. Turn off the [EDIT] indicator.
5. Use [ZONE/PART SELECT] (function button) to select
the Zone.
6. Use / to select a Parameter.
7. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to modify the value.
* If you wish to move to a different display group, turn on the
[EDIT] indicator.
Selecting the Patch
Mode PLAY Page Press [PATCH].
Selecting a Patch Use the VALUE dial, [INC/+], [DEC/-], or numeric keys to
select.
Selecting a Patch Group USER: Press [USER].
CD-A–H: Press [CARD] → [A]–[H].
PR-A–F, H: Press [PRESET] → [A]–[F], [H].
XP-A–D: Press [EXP] → [A]–[D].
Selecting Patches Using
the Digit Hold Function 1. Press [SHIFT] + numeric key [0] (turn on the Digit Hold
function).
2. Use the numeric keys to specify the number of the one’s
place.
* To turn off the Digit Hold function, press [SHIFT] + [0] once
again.
Transposing the
Keyboard by Octave Press [-OCT] or [+OCT].
Transposing the
Keyboard in Semitone
Steps Transpose on/off:Press [TRANSPOSE].
Lower the keyboard:Press [TRANSPOSE] + [-OCT].
Raise the keyboard:press [TRANSPOSE] + [+OCT]