P. 125) – Roland XV-88 User Manual

Page 125

125

Chapter 7. Adding Effects

Chapter 7

13: SPACE-D

Space-D is a multiple chorus that applies two-phase
modulation in stereo. It gives no impression of modulation,
but produces a transparent chorus effect.

fig.MFX-13

Pre Dly (Pre Delay Time)

Adjust the time delay from when the direct sound begins
until the processed sound is heard.

Rate #

Adjust the rate of modulation.

Depth

Adjust the depth of modulation.

Phase

Adjust the spatial spread of the sound.

LowGain (Low Gain)

Adjust the gain of the low frequency range.

Hi Gain (High Gain)

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the
chorus sound. With a setting of D100:0W only the direct
sound will be output, and with a setting of D0:100W only the
chorus sound will be output.

Level (Output Level)

Adjust the output level.

14: STEREO CHORUS

This is a stereo chorus. A filter is provided so that you can
adjust the timbre of the chorus sound.

fig.MFX-14

Pre Dly (Pre Delay Time)

Adjust the time delay from when the direct sound begins
until the processed sound is heard.

Rate #

Adjust the rate of modulation.

Depth

Adjust the depth of modulation.

Phase

Adjust the spatial spread of the sound.

Filter Type

Select the type of filter.

OFF

: a filter will not be used

LPF

: cut the frequency range above the cutoff frequency

HPF

: cut the frequency range below the cutoff frequency

Cutoff (Cutoff Frequency)

Adjust the basic frequency of the filter.

LowGain (Low Gain)

Adjust the gain of the low frequency range.

Hi Gain (High Gain)

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Level (Output Level)

Adjust the output level.

L in

R in

Space-D

L out

R out

2-Band

Balance W

Balance D