Roland XV-88 - Manual (Page 161)

161
Chapter 7. Adding Effects
Chapter 7
Copying Another Effect
Setting (Effects Copy)
This function lets you copy data of any Performance, Patch,
or Rhythm Set into the currently selected Performance,
Patch, or Rhythm Set. This function can help you save time.
1. Make sure that a Patch, Rhythm Set, or Performance is
selected.
2. Press [UTILITY], getting its indicator to start blinking.
3. Press the numeric key [2], then or to call up the
PATCH/RHYTHM/PERFORM FX COPY page.
fig.10-14.e
4. Press the cursor buttons to move the cursor to the
parameter you wish to set.
5. Either rotate the VALUE dial or press [INC/+]/[DEC/-]
to set the value.
When the cursor is located at Number, you can also use
[USER], [PRESET], and [A]–[F] to select a group, and
then use the numeric keys to choose the number.
6. Press to move to the next display, and then select the
contents of the effect that you wish to copy.
fig.10-15.e
7. Either by rotating the VALUE dial or by pressing [INC/
+]/[DEC/-], set the value.
ALL : Multi-effects, Chorus, and Reverb settings
MFX : Multi-effects settings
CHORUS : Chorus settings
REVERB : Reverb settings
CHO&REV : Chorus and Reverb settings
8. Press [ENTER] to execute the Copy operation.
9. Press [UTILITY] to return to the previous page.
Copy source Performance/
Patch/Rhythm Set
(group, number, name)
Copy source
Copy type