Roland XV-88 - Manual (Page 219)

219
Error Messages
Appendices
fig.err12
Situation: A problem has occurred with the MIDI cable
connections.
Action: Check that MIDI cables are not broken or pulled
out.
fig.err13
Situation: A MIDI message was received incorrectly.
Action: If the same error message is displayed
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the XV-
88.
fig.err14
Situation: This memory card cannot be used by the XV-88.
Action: Format the memory card on the XV-88.
fig.err15
Situation: The data in user memory has been lost.
Action: Use the Factor Reset function (UTILITY/UTIL
2/FACTORY RESET) to initialize the memory to
the factory settings.
fig.err16
Situation 1: The Internal parameter (UTILITY/UTIL 1/
PROTECT/WRITE PROTECT) is turned ON.
Action 1: Turn the Internal parameter OFF.
Situation 2: The Exclusive parameter (UTILITY/UTIL 1/
PROTECT/WRITE PROTECT) is turned ON,
and Exclusive messages cannot be received.
Action 2: Turn the Exclusive parameter OFF.
fig.err17
Situation: The PR-H (GM2) group Patch/Rhythm Set
cannot be edited.
Action: Select a Patch/Rhythm Set from another group
(USER, CD-A–H, PR-A–F, XP-A–D) and edit.