RuggedCom RuggedRouter RX1100 - Manual (Page 92)

10. Multilink PPP over T1/E1
Revision 1.14.3 92 RX1000/RX1100™
Figure 10.1. T1/E1 WAN Interfaces
Click on Assign new MLPPP logical interfaces to specify the parameters of the MLPPP bundle.
The bundle can have one or more PPP links over T1/E1.
Figure 10.2. Edit MLPPP Logical Interface Menu
• The Local IP address field specifies the IP address of the MLPPP interface.
• The Netmask field specifies the Network Address mask.
• The Remote Address field specifies the IP address of the remote end of the MLPPP link.
• The Default Gateway field specifies the IP address of the default gateway to use while the
MLPPP link is active (optional).
• The Description field allows the administrator to store a brief description of MLPPP link.
• The MLPPP Channel Setting table allows one or more T1/E1 channels to be included in the
MLPPP bundle.
After the fields have been entered, click the Save button to create the MLPPP bundle.
10.3. Multilink PPP Statistics
Once an MLPPP interface is configured, interface statistics become available for both the T1/E1 links
which comprise the MLPPP bundle and for the MLPPP interface itself.
The T1/E1 link statistics interface is described in T1/E1 Link Statistics .