RuggedCom RuggedRouter RX1100 - Manual (Page 307)

34. Maintaining The Router
Revision 1.14.3 307 RX1000/RX1100™
The WEBMIN service allows the configuration of multiple operator accounts, each logged separately,
and each with a different privilege level. Please refer to
Webmin User and Group Fundamentals for
more detail on Webmin privilege levels.
The RADIUS server authenticating the WEBMIN service must also be configured to supply a
"privilege-level" field which is used to allow different levels of access to different users of the web
management interface. See
RADIUS Server Configuration for more information on configuring the
RADIUS server.
34.7.2. RADIUS Authentication Configuration
Figure 34.32. RADIUS Authentication Main Menu
RADIUS Authentication is configured from within the Maintenance menu, Miscellaneous sub-menu.
This menu allows you to add, delete and RADIUS servers. Add a server by by clicking on the "add-
above" or "add-below" arrows in the Add column. You may also edit a server by following its link
under the Address field.
Reorder the servers by clicking on the arrows in the Move column.
34.7.3. Edit RADIUS Server Parameters
Figure 34.33. RADIUS Authentication Server Parameters
This menu configures, tests and deletes RADIUS server entries.
The Hostname/IP field configures the RADIUS server's IP address.
The Port Number field sets the port number used by the RADIUS server. The default port for RADIUS
is 1812.