Upgrading software – RuggedCom RuggedRouter RX1100 User Manual
Page 90
9. Configuring Frame Relay/PPP And DDS
Revision 1.14.3
90
RX1000/RX1100™
9.2.7. Upgrading Software
For some customers, access to remote sites in accomplished solely by a DDS connection. Usually
a software upgrade will stop the system being upgraded, perform the upgrade and then restart it. If
DDS port was upgraded in this way, the upgrade would fail as the DDS link was taken down. Instead,
DDS software upgrades modify only the software on the disk. You must schedule a reboot in order
to run the new version of DDS software.