RuggedCom RuggedRouter RX1100 - Manual (Page 264)

30. Configuring SSH
Revision 1.14.3 264 RX1000/RX1100™
30.2.3. Networking
Figure 30.3. SSH Server Networking
The Listen on addresses fields determine an IP addresses and port upon which SSH will accept
a connection.
The Listen on port field determines the port number SSH will listen on, assuming Listen on
addresses is set to “All addresses”.
The Accept Protocols fields determine which versions of SSH will be allowed.
The Disconnect if client has crashed field determines whether the SSH server should periodically
check to see if the client is still alive.
The Time to wait for login field determines the maximum time from a connection request until login
completes, after which the client will be disconnected.
The Allow TCP forwardingfield specifies whether TCP forwarding is permitted. If this option is set,
clients on a remote network can tunnel TCP connections to machines on the RuggedRouter's network.
The Allow connection to forwarded portsfield specifies whether remote hosts on the client network
are allowed to connect to ports forwarded for the client.
30.2.4. Access Control
Figure 30.4. SSH Server Access Control