RuggedCom RuggedRouter RX1100 - Manual (Page 28)

1. Setting Up And Administering The Router
Revision 1.14.3 28 RX1000/RX1100™
Figure 1.9. RuggedRouter Hardware Information Menu
1.3.9. Restoring A Configuration
The Restore A Previous Configuration command provides a means to restore a previously taken
snapshot of the configuration of the router.
Note
The router will reboot immediately after restoring configuration.
The user is first prompted to select either the factory default configuration or a previously made
archive.
Note
Restoring the factory defaults will reset IP addresses and may make the router impossible to reach
from the network.