RuggedCom RuggedRouter RX1100 - Manual (Page 271)

32. Configuring IRIGB And IEEE1588
Revision 1.14.3 271 RX1000/RX1100™
Dielectric Type Time Delay in ns/m (ns/ft)
Air Space Polyethylene (ASP) 3.45-3.63 (1.15-1.21)
Solid Teflon (ST) 4.38 (1.46)
Air Space Teflon (AST) 3.39-3.60 (1.13-1.20)
32.2. IRIGB/IEEE1588 Configuration
32.2.1. IRIGB/IEEE1588 Main Menu
Figure 32.1. IRIGB/1588 Main Menu
This menu allows you to configure IRIGB and IEEE1588, display its current status and review historical
changes.
32.2.2. General Configuration
Figure 32.2. IRIGB/IEEE1588 General Configuration menu
This menu allow you to configure general parameters.
The Reference Clock Selection field selects the order in which to prefer reference clocks.
The Cable Compensation field specifies the value, in nanoseconds, that will be used to compensate
for the cable type and length. The compensation is done using integer nanosecond values. Fractional
decimal values will be truncated.
32.2.3. IRIGB Configuration
Figure 32.3. IRIGB Configuration menu