Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 86)

86
Chapter 3 OS Installation Using ServerStart
8
When a confirmation message to restart appears, click [Restart].
The system restarts and installs high reliability tools.
Installation is performed automatically.
9
When a message on installation completion appears, press any key.
10
Restart the system.
Click [Start]
→ [Shutdown]. Select [Restart] and click [OK].
The system restarts.
11
When the system restarts, log on to the server using the Administrator account
for the local computer.
The tool for updating drivers starts up.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" ( pg.129) and perform necessary procedures
before starting server operations.