beautypg.com

Primera Technology Fujitsu Tape Drive RX300 S2 User Manual

Page 45

background image

45

PRIMERGY RX300 S2 User’s Guide

2

Checkin

g before O

S

Inst

allatio

n

2

Check the MAC address.

Start up the server from the network.

The MAC address is displayed as shown below.

The MAC address is required for remote installation. Write it down.

You can turn the power on from a client (via a LAN) by utilizing the Wakeup on LAN (WOL) function.

Refer to "5.5.5 Turning the Power On via a LAN" ( pg.152).

Be sure to install ServerView to control the power supply via a LAN.

CLIENT MAC ADDR: XX XX XX XX XX XX