Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 39)

39
PRIMERGY RX300 S2 User’s Guide
1
Overview
1.5 Workflow
Use the following workflow from server installation to start of operation.
Referring to "2.2 Selecting the Installation Method", decide what installation method to use.
ServerStart, a software that enables everything from OS installation/setup to the installation of high
reliability tools to be performed in one operation, comes with this server. It is recommended that
ServerStart is used to perform installation.
- Install internal options
- Set hardware
Referring to "2.1 Preparation on the server", "Chapter 7 Installing Internal Options", and
"Chapter 8 Configuring Hardware and Utilities", prerare the server.
Checking precautions on installation
Before installing the OS, check the precautions on installation by referring to "2.3 Precautions on Installation".
Procedures before operation
Before operating the server, refer to "Chapter 5 Operations after OS installation".
High reliability tool installation
Start operations
Using ServerStart
Referring to "Chapter 3 OS Installation Using
ServerStart", perform OS installation.
Manual installation
Referring to "Chapter 4 Manual OS
Installation", perform OS installation.
OS installation
When the OS is installed manually, it is necessary to install high reliability tools. ServerView requires
settings before server operation. For installation method and details about each high reliability tool, refer to
"Chapter 6 High Reliability Tools".
Preparing the server
Selecting the installation method
Installing the server
Referring to "Safety Precautions" and "Start Guide", install the server to a suitable place.
Installing internal options
Referring to "Chapter 7 Installing Internal Options", install the internal options.