Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 116)

116
Chapter 4 Manual OS Installation
■ Creating Driver Disks
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1
Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2
Click [Drivers Diskettes].
The [FloppyBuilder Driver Disk] window appears.
3
Click the type of the driver you want to create.
4
Click the driver disk you want to create.
Follow the message and insert a floppy disk.
5
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The driver disk is automatically created. When a message appears indicating that creating the
disk is completed, click [OK] and eject the disk.