Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 301)

301
PRIMERGY RX300 S2 User’s Guide
Ap
pend
ix
A
C.3 Configuring the Terminal Software (PC)
To use the remote control function, specify the baud rate and flow control method for the terminal
software on the PC.
Set up the PC ports as shown below. (The server ports are fixed to the set values below.)
(Window example)
table: Configuring the Terminal Software
Item Contents
Bits/sec. 9600
Data bit 8
Parity Not applied
Stop bit 1
Flow control Not applied