Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 183)

183
PRIMERGY RX300 S2 User’s Guide
Inst
allin
g I
nte
rn
al O
pti
ons
7
7.4.1 Location and Order of Memory Module Installation
Install memory modules in the memory slots on the baseboard.
One memory bank consists of Slots A and B on this server.
■ Installation Order
To install memory modules, install by a pair of memory modules, each having the same capacity, to the
corresponding slots in the sequence of Bank 3, Bank 2, Bank 1, and Bank 0.
7.4.2 Available Memory Modules and Cautions on
Installation
■ Available Memory Modules
The following memory module types can be used on this server.
■ Contents of the Optional Memory Package
Before installing memory modules, refer to"Appendix B.2 Memory Specifications" ( pg.295) to check
the contents of the optional package.
table: List of Available Memory Modules
Product name Model Remarks
Memory Module-1GB PG-RM1BC 512MB DDR2 SDRAM (2)
Memory Module-2GB PG-RM2BC 1GB DDR2 SDRAM (2)
Memory Module-4GB PG-RM4BC 2GB DDR2 SDRAM (2)
Baseboard
[Front]
Memory Slot 3B
Memory Slot 3A
Memory Slot 2B
Memory Slot 2A
Memory Slot 1B
Memory Slot 1A
Memory Slot 0B
Memory Slot 0A
Memory Bank0
Memory Bank1
Memory Bank2
Memory Bank3