Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 127)

127
PRIMERGY RX300 S2 User’s Guide
4
Manu
al O
S
In
st
allation
4.3.2 Installing the LAN Driver (Windows 2000 Server)
1
Insert the driver disk created from the ServerStart CD-ROM into the server.
For the onboard LAN, insert the ServerStart CD-ROM.
2
Right-click the [My Computer] icon on the desktop and select [Manage] from
the displayed menu.
3
Click [Device Manager].
As many [Ethernet controller] items as the installed LAN ports are displayed under [Other
devices].
Double-click each [Ethernet controller] item and perform the following Steps 4 to 11 on all LAN
ports.
4
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
5
Click [Reinstall Driver] in the [General] tab window.
The [Device Driver Upgrade Wizard] window appears.
6
Click [Next].
7
Select [Install an optimum driver (Recommended)] and click [Next].
The [Identify Driver File] window appears.
8
Select [Floppy disk drive] ([CD-ROM drive] for onboard LAN) in [Search
location options] and click [Next].
Detected drivers are displayed.
9
Click [Next].
Driver installation starts. When it is completed, a completion window appears.
10
Click [Finish].
11
Click [Close] to close the properties window.
When [Ethernet controller] items are displayed under [Other devices], perform the above Steps
4 to 11 on all [Ethernet controller] items.
12
Eject the driver disk and restart the system.