Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 198)

198
Chapter 7 Installing Internal Options
5
While holding the L-shape parts of the PCI card holder, securely place the
holder into the original PCI slot.
Hold down on the L-shape parts of the PCI card holder to properly install the PCI card holder
into the PCI slot.
6
Return the slide lock and handle to the original positions.
7
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
To remove the expansion card, simply reverse the installation procedures.
PCI card holder
Slide lock
Handle