Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 236)

236
Chapter 8 Hardware Configuration/Utilities
CPU Halt Mode (C1E) Standard (Fixed parameter) Configures the CPU internal setting.
NX Memory Protection Disabled (Fixed parameter)
CPU MC Status Clear Next Boot (Fixed
parameter)
Enhanced SpeedStep Disabled (Fixed parameter) Configures the CPU internal setting.
Note:
This item is displayed only when the 3.6GHz
CPU is used.
CPU Throtting Delay No Delay (Fixed
parameter) Sets the time delay after which the CPU moves to
throttling when it overheats.
USB Host Controller • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to use the USB host controller
(2.0 or 1.1).
USB2.0 Host Controller • Disabled
• Enabled (at the time of
purchase)
USB BIOS Legacy
Support • Disabled (at the time of
purchase)
• Enabled
Sets whether to enable or disable a USB-compatible
keyboard in an MS-DOS environment.
This item cannot be selected when [USB Host
Controller] is set to [Disabled].
table: Items on the Advanced System Configuration Submenu
Item Setting Description