Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 180)

180
Chapter 7 Installing Internal Options
7
Install the heat sink.
Attach the heat sink to the installed CPU and fasten it with the screws.
Carefully tighten the screws in diagonal order.
8
Attach the ventilation system cover and top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
9
Return the server to the rack.
10
Initialize the Extended System Configuration Data (ESCD).
On the [Advanced] menu of the BIOS Setup Utility, set [Reset Configuration Data] to [Yes].
→ [Reset configuration Data] in "8.2.5 Advanced Menu" ( pg.230)
11
Store the BIOS settings.
"5.3 Storing the System Setting Information" (pg.142)
■ How to Remove a CPU
To remove a CPU, simply reverse the installation procedures.