Paradyne ACCULINK 336x E1 - Manual (Page 53)

ACCULINK 336x E1 NTU
3-32 December 1996 3360-A2-GB20-20
Clearing DS0 Channel Allocation
You can clear (deallocate) all the DS0 channels
currently allocated to either the network interface, the
G.703 DTE interface, or the synchronous data ports.
To clear DS0 channel allocation,
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the
Chan selection appears on the screen.
5. Select Chan.
F1
Edit:
Port
NET Chan
F2 F3
6. From the Channel Config screen, select Clear.
F1
Channel Config:
Dsply
Clear DTE
F2 F3
7. From the Clear Channel screen, select NET to
clear all DS0 channels assigned to the network
interface. Or, select DTE to clear all DS0 channels
assigned to the G.703 DTE interface. Or, select a
port to clear all assignments for that data port.
F1
Clear Channel:
NET
DTE Port1
F2 F3