Paradyne ACCULINK 336x E1 - Manual (Page 30)

Operation
3-9 3360-A2-GB20-20 December 1996
To change the customer identification (CID),
1. From the top-level menu, press the key until
the Ctrl selection appears on the screen.
F1
E1 HDSL NTU
Stat
Test Cnfig
F2 F3
2. Select Ctrl.
F1
E1 HDSL NTU
Test
Cnfig Ctrl
F2 F3
3. From the Control screen, press the key until
the CID selection appears on the screen.
F1
Control:
Rel
LED ClrReg
F2 F3
4. Select CID.
F1
Control:
Reset
CID DL
F2 F3
5. Use the and keys to position the cursor
under the desired character. You must enter a
character before the
moves the cursor to the
next space to the right.
F1
CustID: xxxxxxxx
Up Down Save
F2 F3
6. Enter the desired ID. Press F1 (Up) and F2
(Down) to scroll up and down through the valid
characters/numbers for the customer ID. Valid
characters are 0 through 9, #, -, ., /, A to Z, and
blank space. Press F3 (Save) to save the ID.
F1
CustID: xxxxxxxx
Up Down Save
F2 F3