Paradyne ACCULINK 336x E1 - Manual (Page 160)

Glossary
Glossary-7 3360-A2-GB20-20 December 1996
parity A way of checking data accuracy by counting the number of bits that have a value
of one.
payload The information bits in a frame.
PBX Private Branch Exchange. Telephone switching equipment dedicated to one
customer. A PBX connects private telephones to each other and to the public
network.
PC Personal computer. In this document, references to a PC imply an IBM PC or an
IBM-compatible PC.
PDU Protocol Data Unit. Used when adding routes in the Internet.
PDV Pulse Density Violation. The number of “ones” (marks, pulses) is not adequate for
the line requirement.
Perf branch Performance Report branch of the E1 NTU menu tree.
PLB Payload Loopback. Loops the received signal on the network interface back to the
network after it has passed through the framing circuity of the E1 NTU.
port An access point for data entry or exit.
PORT (1– 4) interface The synchronous data port interface on the E1 NTU.
POWER connector The power input connector on the E1 NTU.
power-up self-test A test that checks most hardware components when power is applied to the device
or a reset is initiated.
PPP Point-to-Point Protocol. A link layer protocol used by SNMP.
PRBS Psuedo-Random Bit Sequence. A test pattern containing any possible combination
of digital ones and zeros for a given string length.
primary clock The primary timing source used to synchronize all of the E1 and data port interfaces
on the E1 NTU.
PRM Performance Report Message. A message indicating performance data such as
errored seconds, unavailable seconds, etc.
protocol A set of rules that determines the behavior of functional units in achieving
communication.
Ptrns branch Test Patterns branch of the E1 NTU menu tree.
pulse density A measure of the number of “ones” (marks, pulses) in relation to the total number
of bits transmitted.
QRSS Test Quasi-Random Signal Test. A test pattern simulating a random pattern of digital
ones and zeros used to simulate normal transmission.
RAI Remote Alarm Indication. A remote alarm on an E1 line.
RAM Random-access memory. Read/write memory that is volatile and loses its contents
when power is removed.
register A part of the device’s memory that holds stored values.
Rel branch Release branch of the E1 NTU menu tree.