Paradyne ACCULINK 336x E1 - Manual (Page 29)

ACCULINK 336x E1 NTU
3-8 December 1996 3360-A2-GB20-20
Displaying Unit Identity
The identity of the E1 NTU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
Front Panel Menu ).
The customer identification is the only identity number
you can change.
To display the E1 NTU’s identity (ID),
1. From the top-level menu screen, select Stat.
F1
E1 HDSL NTU
Stat
Test Cnfig
F2 F3
2. From the Status screen, press the key until the
ID selection appears on the screen.
F1
Status:
HDSL DevHS STest
F2 F3
3. Select ID.
F1
Status:
TStat
LED ID
F2 F3
4. The following screens appear in the order listed
each time you press the key.
F1
Identity:
Ser=
xxxxxxx
F2 F3
F1
Identity:
Mod=
xxxx-xx-xxx
F2 F3
F1
Identity:
Cust ID=
xxxxxxxx
F2 F3
F1
Identity:
SRev=
xx.xx.xx
F2 F3
F1
Identity:
CCA1=
xxxx-xxx
F2 F3
F1
Identity:
CCA2=
xxxx-xxx
F2 F3
F1
Identity:
CCA3=
xxxx-xxx
F2 F3